Brachytherapy Types

Oct 03, 2018

Brachytherapy is a form of localized radiation therapy involving the direct placement of radioactive material close to or inside a tumor. Brachytherapy varies by dose, mode of delivery and the location of the cancer.

Permanent and temporary brachytherapy

In permanent brachytherapy, seeds containing the radioactive material are implanted either inside or nearby the tumor. Low dose radiation is gradually absorbed over time and eventually fades after six months.

For temporary brachytherapy, a catheter or applicator is used to deliver the radiotherapy to a target site. In cases of low dose therapy, the radioactive material is usually placed in the delivery device for 12 to 24 hours before being removed, while high dose radiation may only be administered for a matter of minutes.

Low or high dose brachytherapy

High dose-rate (HDR) brachytherapy

HDR (>12 Gy/h) brachytherapy is given over periods of 10 to 20 minutes. This is usually performed as an outpatient procedure, although patients are sometimes admitted to hospital for one to two days if they are receiving more than one session of treatment. The radiation dose is delivered as a short burst using a remote afterloading machine.

Low dose-rate (LDR) brachytherapy

LDR (0.4-2 Gy/h) brachytherapy is administered at a continuous rate in sessions that can last up to 50 hours.

PDR brachytherapy

Treatment can also be delivered in periodic pulses, referred to as pulsed dose-rate or PDR. Here, the radiation is usually delivered once every hour rather than continuously.

Location of the implant

Some of the places in the body where a brachytherapy implant may be inserted include:

Intracavitary brachytherapy - The radioactive source is inserted into a body cavity such as the vagina or uterus
Interstitial brachytherapy - The source is inserted into bodily tissues
Intraluminal brachytherapy - The source is placed within an intraluminal space such as the esophagus or trachea
Surface (mould) brachytherapy - Radioactive moulds are attached to the surface of the skin
Intravascular brachytherapy - The source is placed within blood vessels

Brachytherapy according to source loading

Brachytherapy is delivered to the target site using one of two methods:

Hot loading - The radioactive material is placed manually and directly into the target tissue.
Afterloading - A delivery device is placed into position using imaging studies and then loaded with radioactive material either by hand (manual afterloading) or by an automated machine (automatic remote afterloading).

Permanent and temporary brachytherapy

Low or high dose brachytherapy

Location of the implant

Brachytherapy according to source loading

Sources