Site Under Development, Content Population and SEO, Soft Launch 1st January 2020

  Nov 16, 2018
pNeuton Model A Ventilator from Airon.
pNeuton Model A Ventilator from Airon.
  Nov 16, 2018


The pNeuton model A is a transport ventilator with built-in CPAP (Continuous Positive Airway Pressure) for critical care patient support in hospital environments.

With simple-to-use controls – Tidal Volume, Respiratory Rate and Pressure Limit – pNeuton A can provide volume-targeted or pressure-limited ventilation. The built-in high output demand flow CPAP system insures critical care ventilation needs are optimized for spontaneous and mandatory breaths.

One device for OR, ICU, MRI, and more:

Operating without the need of batteries or electrical power, the pNeuton A can help you care for the most difficult patients, from the emergency room to special procedures, MRI to the operating room and intensive care unit, wherever the patient may be located.

Benefits for the patient:

  • Low patient Work of Breathing (WOB) with peak flow of up to 140 L/min to meet patient needs
  • 100% or 65% to match patient oxygen requirements
  • Switch from CPAP face mask to invasive ventilation seamlessly and without interruption
  • Low-profile, easy-seal mask reduces facial pressure
For more detail: http://aironusa.com/hospital-products/hospital-pneuton-a/
Request a Quote
for pNeuton Model A Ventilator from Airon.